Lift Table Skirting

Standard options and features

Skirt sides: 4
Skirt fold width: 3"
Fold is located: External or Internal
Attachment Top: Flat Steel Bar in a Pocket
Attachment Bottom: Flat Steel Bar in a Pocket
Material: 22 oz industrial grade vinyl
Color: Black and Yellow, All Black or All Yellow
Vent panels: Yes on top fold

How does the skirt mount to the lift table?

There is a 3" flange pocket on the top and bottom of the skirt that attaches to the side of the lift table as shown below. In this pocket you will slide in a flat steel bar that we provide and use the Tek screws that are also provided to bolt the skirt to the lift table every 12". If you do not choose flat steel bar mounting then the skirt will still have the pocket for you to mount it using other methods.

Does the skirt need to attach at the bottom?

Most installations allow for the skirt to rest on the floor while only the top is attached. The weight of the skirt often is enough to keep the skirt on the floor. We also have optional weight bars for the bottom which can be ordered and added after the skirt is installed.

What is the difference between internal and external fold?

• Below you can see that the folds of the bellows can face outward, or inward depending on what style you want.
• Please be aware that internal fold bellows need adequate room facing inwards for the folds.
• For instance, if you have a 50" x 50" top size and a 50" x 50" bottom lift table size then an internal fold will not work.
• Pit lifts that are mounted in the floor generally always need an internal fold for them to work.
• Internal folds have the smallest foot print for conserving space.
• External folds are the most common and best option for when you are unsure that an internal fold will work.

Are there any OSHA requirements regarding scissor lift table skirts?

The Occupational Safety and Health Administration (OSHA) regulates workplace safety around pinch points to reduce occupational injuries. According to the OSHA definition, pinch points are points on presses and other workplace equipment where workers could get a finger or other body part caught between two moving parts. The OSHA warns that pinch points can cause severe injuries, including amputation, and regulates work practices for workers exposed to pinch points.

Scissor lift tables have scissors which are a very dangerous pinch points. Thus, if the lift table is not properly shrouded with a lift table skirt then OSHA will issue your facility a fine. This includes mobile scissor lift tables.

Are there any specific requirements for having skirting on scissor lift tables? Are they absolutely required?

If OSHA comes to your facility and finds a scissor lift table that is not skirted / guarded then you will most likely be fined. A scissor lift table is a pinch point hazard and industrial facilities have to guard against pinch points. In addition you are providing a safer work environment for your workers.

Can you please give us the OSHA Rule or reference that speaks about guarding of pinch points?

OSHA does not specifically call out lift tables in their documentation. Rather they call out pinch points and shear points which can be present with many different machines. These pinch points and shear point must be properly guarded to protect your personnel.