AKON's round lift table bellows are made for round lift tables, round platforms, and circular surfaces. They cover the entire scissor mechanism without leaving extra material sticking out at the corners.
We make each one to match your platform diameter and travel. They are made with heavy 22 oz. vinyl, and most orders ship in 7 to 12 work days.
The round cover fits closely around the edge of the platform. This keeps carts, pallets, and people's feet from catching on loose or sticking-out material.
Round vs. Rectangular Lift Table Bellows
Rectangular Bellows
The folds turn a corner on every side to fit a square or rectangular lift table.
Round Bellows
The folds run all the way around in one continuous ring with no corners, to fit a circular lift platform.
Both types of covers do the same job: they close off the pinch points between the scissor arms, where a body part or object could get stuck.
According to OSHA 1910.212, machines must have guarding at pinch points and other dangerous moving parts. A skirt that matches the shape of the table is one of the simplest ways to guard a lift table. For square and rectangular tables, see AKON's scissor lift table skirts.
Our Experience With Round Lift Tables
It's been our personal experience that many customers with a round lift table or turntable first ask whether a standard square skirt will work. It will cover the scissors, but the corners stick out past the round platform, where they can get kicked, snagged by carts, and worn through early. For this reason, we make round bellows to your measurements. Send us the platform diameter, lowered height, and raised height, and we make circular folds that fit around the platform with no extra corners.
It's also been our personal experience that many customers worry about fitting a round cover to a lift that is already bolted down. A full-length zipper split lets you open the cover along its length and wrap it around the lift from the side, so there is no need to remove the platform before installing it.
Where Round Lift Table Bellows Are Used
Turntable Lift Tables
These round tops rotate so pallets can be loaded from any side. The bellows guards the lift mechanism under the rotating platform.
Automation Lines
These round lift platforms are built into conveyor lines and robot cells where the scissors sit right next to other moving parts.
Lifting Columns
These are tall, narrow round bellows made to cover a single lifting cylinder or column. They keep dirt off the moving rod. They are part of AKON's custom industrial bellows line.
How We Build Round Bellows
MATERIAL
22 oz. vinyl
FOLD DEPTH
1.5", 2" or 3"
COLORS
Black and yellow, yellow, black or blue
MOUNTING
Velcro, or a pocket for your own flat bar
Key Features
- Made to fit any platform diameter and travel
- Lock-stitched seams on every fold for a longer life
- Optional stiffening wires help the folds hold their round shape
- Vents let air escape so the bellows does not balloon as the table lowers
- Full-length zipper split for fitting around a lift that is already installed
- Rated for indoor and outdoor use
How To Measure for Round Lift Table Bellows
Measure with the table empty. We need just three measurements to give you a price quote:
A - Platform diameter: Measure straight across the widest part of the round platform.
B - Lowered height: Measure from the floor to the underside of the platform with the table all the way down.
C - Raised height: Measure from the floor to the underside of the platform with the table all the way up.
Also tell us the fold depth and your preferred color. Not sure how to measure? Don't worry, we can help. Just send us a photo or drawing through the quote form.
Check the Lift Base Before You Order
It's also been our personal experience that the base of the lift is where round bellows run into trouble. The cover hangs straight down from the edge of the round platform, so the base underneath must be smaller than the platform's circle. Some round lifting tables and pallet positioners come with a square or rectangular base. Their corners, support rails, or mounting brackets may stick out beyond the round platform.
When that happens, the bottom of the skirt may land on the base instead of reaching the floor. Sometimes the skirt can simply rest on it. Other times the round platform comes down on top of the folds and pinches the skirt against the base, which wears through the vinyl quickly.
Have your three measurements? Send them over and most quotes come back within 10 to 15 minutes.
Price, Lead Time and Warranty
Price
Priced the same way as our rectangular skirts, which run about $530 to $600 for common table sizes.
Lead Time
Most orders ship in 7 to 12 work days.
Shipping
Free shipping by UPS or FedEx parcel.
Warranty
5 years on the skirting and lifetime on the hardware, covering manufacturing defects.
Common Questions
Can you make bellows for a round lift table?
Yes, we make round lift table bellows to your exact platform diameter, in the same 22 oz. vinyl and lock stitching as our rectangular skirts. They also fit turntable tops and round lifts.
What measurements do I need for a round lift table skirt?
You need three measurements: the platform diameter, the lowered height, and the raised height. Take both height measurements from the floor to the underside of the platform. Also tell us your preferred fold depth and color.
Can a round bellows go on a lift that is already installed?
Yes, round bellows can go on a lift that is already installed. Just request a full-length zipper split, which lets you wrap the cover around the lift from the side. This way, you don't have to remove the platform.
How long do round lift table bellows take?
Most round bellows ship in 7 to 12 work days, the same as our rectangular skirts, with free UPS or FedEx parcel shipping.
What to Send for a Quote
- Platform diameter (A)
- Lowered height (B) and raised height (C)
- Fold depth: 1.5", 2", or 3"
- Color
- Whether the platform rotates, and whether you need a zipper split
- A photo of the lift base if any part of it sticks out past the round top
- Quantity
